Face Recognition Temperature Measurement System with functions such as automatic and accurate temperature measurement, face recognition, mask recognition, personal identification comparison, health code scanning, temperature measurement data traceability, and automatic early warning. It strengthen the collection of human flow information in and out of public indoor scenes, it's convenient to find out the one whose temperature is abnormal.It has effectively reduced the difficulty of antiepidemic, control management, enhanced the efficiency of epidemic prevention and control.
Features of Face Temperature Measurement
*Using 256*192 High Resolution Thermal Imaging Camera
*8 core 2.0 industrial grade motherboard MTK
*Support storage of 30,000 libraries locally；
*Support RS232 serial port, Wiegand 26 output
*Support HTTP interface connection;
*Recognition Height：1.2-2.2m
*Detection Rate：1-2sec/person-time
*Precision：± 0.5 ℃
*Long Measure Distance: 0.3-1.2m
Precautions of Face Non Contact Thermometer
*Can only be used indoors, not used for outdoors (you can build a canopy outdoors)
*No direct sunlight
*Cannot be in a windy place
*Can not be in a rainy place
*Not in a place where the temperature is too high or too low
F2/F3 Series Face Recognition Device
We offer face recognition thermal imaging temperature measuring device with various configurations and multiple installation methods. Choose as you like. If there is any product you are interested in , please contact us NOW!
F3-M34-F Face Recognition Access Control Terminal | |||
Model No. | F3-M34-F | ||
Display | 8 inches, Full viewing angle, 170IPS LCD screen | ||
Screen Resolution | 800*1200 | ||
Camera | Type | RGB | Thermal Imaging |
Resolution | 2 Million Pixels | 256*192 | |
Aperture | F2.8 | F2.8 | |
Focal Length | 3.18mm | 3.18mm | |
White Balance | Automatic | Automatic | |
Wide dynamic | Support | Support | |
Vertical Wide Angle |
| ||
Horizontal Wide Angle |
| ||
Basic Specification |
Operating System |
Android9.0 or above | |
Power Supply |
DC12V(±10%)3A | ||
Power Consumption | 15w MAX | ||
Relative Humidity | 0%¨ 90%（In the State of Non-condensing Drops) | ||
Operating Temperature | 5℃-50℃ | ||
IP Grade | IP55（Wall Mounting, Water is Not Allowed at the Junction with the Outlet Box, and a Ceiling Can Be Added） | ||
Working Environment | Indoor and Outdoor (with sunshade) Environment (no wind and direct sunlight) | ||
Size | 275.2MM*123.2MM*30.2MM | ||
Hardware Configuration |
Recognition Method | ¨ ¨Face Recognition | |
¨ ¨Mifare Card（Optional) | |||
¨ ¨IC Card（Optional) | |||
Face Recognition Parameters | ¨ ¨Face Verification Accuracy >99% | ||
¨ ¨Face Recognition Distance 0.5m-1.5m | |||
¨ ¨Card Verification Time 600MS | |||
Local Storage 30000 faces | |||
Interface | Micro USB 1pc | ||
RJ45 Gigabit Network 1pc | |||
Relay Output | |||
Wiegand Interface | |||
RS-232 | |||
Door Contact | |||
Exit Switch | |||
Power Supply | |||
White Fill Light | Support | ||
Indicator Light | Support Green Light for Authentication Success and Red Light for Authentication Failure | ||
Speaker | Dual Speakers, 1.0w | ||
Microphone | Non-noise Reduction | ||
Basic Parameters | WIFI | 2.4G 802.11b/g/n | |
Bluetooth | BluetooH 4.0 | ||
Temperature Measurement Module | Operating Temperature | 5℃ ~ +50℃ | |
Operating Temperature | -20℃ ~ +55℃ | ||
Power consumption | < 0.3w | ||
Pixel | 256*192 Real-time Temperature Output | ||
Measurement Accuracy | ± 0.5℃ | ||
Measuring Distance | 0.3 ~ 1.0m | ||
MTK
Motherboard | Chip | Octa-core A73 | |
Operating System | Android9.0 | ||
RAM | 2GLPDDR4 | ||
Storage | 16GB eMMC | ||
Power Input | 12V/2A | ||
Display | MIPI DSI Maximum Support Resolution 2400 * 1080 | ||
WIFi | 2.4GHz and 5GHz;802.11a/b/g/n/ac | ||
USB | Micro USB Type A Host*1;Micro USB Type A Device*1 USB 2.0 Host*2(1.25mm wafer)
| ||
Microphone | 2W*2 Speaker output | ||
