Home > Product > RFID Reader
  • SM-T0258 RIFD Antenna
  • SM-T0258 RIFD Antenna

SM-T0258 RIFD Antenna

The general-purpose antenna suitable for UHF band RFID applications has the characteristics of high gain, low standing wave, etc. It has the dual advantages of the far-distance reading distance of the linearly polarized antenna and the non-directionality
Share :
  • Product Description
  • Product Parameters
  • Download

Product features 

Electrical performance: The general-purpose antenna suitable for UHF band RFID applications has the characteristics of high gain, low standing wave, etc. It has the dual advantages of the far-distance reading distance of the linearly polarized antenna and the non-directionality of the circularly polarized antenna.

Mechanical properties: Beautiful and compact appearance, waterproof design with waterproof ring and silicone, shell with reinforced design, suitable for all kinds of harsh environments.


Application

The SM-T0258 can be easily used in RFID applications such as access control, warehousing, logistics, and retail in the UHF band.。


Install

The SM-T0258  can be mounted on the steel frame structure or pillar by its own bracket or user-fitted bracket, and connected to the reader through the coaxial cable. The antenna can be installed horizontally or vertically, depending on the mounting orientation of the bracket. After installation, the tilt angle of the antenna can be adjusted according to the actual situation.

The antenna mount is an option and the customer can choose as needed.


Size

SM-T0258 RIFD Antenna


Installation steps

2.1 Horizontal installation


SM-T0258 RIFD Antenna


Step 1: Fix the L plate on the antenna with “M6 nut and flat washer, spring washer”, as shown in Pic3.


SM-T0258 RIFD Antenna


Step 2:: Use "M6 U-bolt, nut washer and flat washer" and "dog teeth" to fix the antenna on the horizontal or vertical steel frame structure or pillar, see Pic 4. 


2.2 Vertical installation


SM-T0258 RIFD Antenna


Step 1:Fix the L plate to the antenna with “M6 nut and flat washer, spring washer”, see Pic 5.


SM-T0258 RIFD Antenna


Step 2:Use the "M6 U-bolt, nut washer and flat washer" and "dog teeth" to fix the antenna on the horizontal or vertical steel frame structure or pillar, see Pic  6.


Antenna pattern


SM-T0258 RIFD Antenna


Pic  7 Antenna pattern 1 (E side)


SM-T0258 RIFD Antenna


Pic 8 Antenna pattern 2(H side)


SM-T0258 RIFD Antenna


Pic 9 Antenna pattern 3 (two-dimensional pattern, gain display greater than 9 dBi)


SM-T0258 RIFD Antenna


Pic 10 Antenna standing wave ratio


SM-T0258 RIFD Antenna


Pic 11 Antenna input port S parameter



Problems and Precautions


The SM-T0258  is a cross-line polarized directional antenna. When using it, care should be taken to adjust the tilt angle of the antenna to obtain optimal read performance.

SM-T0258 can be used outdoors, but not suitable for use in acid/alkaline environments.




Performance

Frequency

902MHz928MHz

Voltage standing wave ratio

1.3:1

Gain

> 9dBi

H side HPBW

70°

E side HPBW

70°

Polarization

Relative humidity

5%95%

Input resistance

50 Ω

Connector type

N-50KFD (N-type male female) (two input ports)

Specification

Size

258mm×258mm×36mm

Weight

0.91kg

Material

ABS

Color

White

IP Grade

IP67

Operating temperature

-40~+ 85

Stored temperature

-40~+ 85